SETTING DHCP(Dinamic Host Configuration Protocol) ROUTER

DHCP(Dinamic Host Configuration Protocol) ROUTER

#Untuk pertama kita install dahulu paketnya : apt-get install dhcp3-server

#Selanjutnya kita konfigurasi pada dhcpd.conf dengan perintah : mcedit /etc/dhcp/dhcpd.conf

#Sesuaikan dengan script dibawah ini terutama yang saya cetak tebal dan abaikan yang lain :

#

# Sample configuration file for ISC dhcpd for Debian

#

#

# The ddns-updates-style parameter controls whether or not the server will

# attempt to do a DNS update when a lease is confirmed. We default to the

# behavior of the version 2 packages ('none', since DHCP v2 didn't

# have support for DDNS.)

ddns-update-style none;

# option definitions common to all supported networks...

option domain-name ".";

option domain-name-servers 162.10.10.2, 192.168.1.1; 

default-lease-time 600;

max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local

# network, the authoritative directive should be uncommented.

#authoritative;

# Use this to send dhcp log messages to a different log file (you also

# have to hack syslog.conf to complete the redirection).

log-facility local7;

# No service will be given on this subnet, but declaring it helps the

# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {

#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {

#  range 10.254.239.10 10.254.239.20;

#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;

#}

# This declaration allows BOOTP clients to get dynamic addresses,

# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {

#  range dynamic-bootp 10.254.239.40 10.254.239.60;

#  option broadcast-address 10.254.239.31;

#  option routers rtr-239-32-1.example.org;

#}

# A slightly different configuration for an internal subnet.

subnet 192.10.10.0 netmask 255.255.255.0 {

  range 192.10.10.3 192.10.10.20;

  option domain-name-servers 162.10.10.2, 192.168.1.1;

  option domain-name ".";

  option routers 192.10.10.1;

  option broadcast-address 192.10.10.255;

  default-lease-time 600;

  max-lease-time 7200;

}

# Hosts which require special configuration options can be listed in

# host statements.   If no address is specified, the address will be

# allocated dynamically (if possible), but the host-specific information

# will still come from the host declaration.

#host passacaglia {

#  hardware ethernet 0:0:c0:5d:bd:95;

#  filename "vmunix.passacaglia";

#  server-name "toccata.fugue.com";

#}

# Fixed IP addresses can also be specified for hosts.   These addresses

# should not also be listed as being available for dynamic assignment.

# Hosts for which fixed IP addresses have been specified can boot using

# BOOTP or DHCP.   Hosts for which no fixed address is specified can only

# be booted with DHCP, unless there is an address range on the subnet

# to which a BOOTP client is connected which has the dynamic-bootp flag

# set.

#host fantasia {

#  hardware ethernet 08:00:07:26:c0:a5;

#  fixed-address fantasia.fugue.com;

#}

# You can declare a class of clients and then do address allocation

# based on that.   The example below shows a case where all clients

# in a certain class get addresses on the 10.17.224/24 subnet, and all

# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {

#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";

#}

#shared-network 224-29 {

#  subnet 10.17.224.0 netmask 255.255.255.0 {

#    option routers rtr-224.example.org;

#  }

#  subnet 10.0.29.0 netmask 255.255.255.0 {

#    option routers rtr-29.example.org;

#  }

#  pool {

#    allow members of "foo";

#    range 10.17.224.10 10.17.224.250;

#  }

#  pool {

#    deny members of "foo";

#    range 10.0.29.10 10.0.29.230;

#  }

#}

#setelah itu tekan F2 untuk menyimpan dan F10 untuk keluar .

#setelah itu konfigurasi untuk menetukan output ethernet dari DHCP, masuk dengan perintah :

#mcedit /etc/default/isc-dchp-server

#Lalu tambahkan Ethernet didalam tanda petik , atau lihat script berikut :

# Defaults for dhcp initscript

# sourced by /etc/init.d/dhcp

# installed at /etc/default/isc-dhcp-server by the maintainer scripts

#

# This is a POSIX shell fragment

#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?

#      Separate multiple interfaces with spaces, e.g. "eth0 eth1".

INTERFACES="eth2"

#setelah itu tekan F2 untuk menyimpan dan F10 untuk keluar .

#setelah itu retart dhcp dengan perintah : /etc/init.d/isc-dhcp-server restart

#silahkan dicoba .